home *** CD-ROM | disk | FTP | other *** search
/ Hacker's Secrets 4 / Hacker's Secrets 4.iso / misc / hakauto1.txt < prev    next >
Text File  |  1991-06-23  |  5KB  |  97 lines

  1.  
  2.      -------------------------------------
  3.        Intro to Automatic Voice Network
  4.        Commonly know as AUTOVON
  5.        Part I
  6.      -------------------------------------
  7.  
  8. AUTOVON is the Military Voice Communications System.  Each Military
  9. Installation has it's own prefix for use in the AUTOVON system.  Not all
  10. telephones on military installation have the capability to call another
  11. military installation via AUTOVON.  However, they can all receive an AUTOVON
  12. call coming from another installation.
  13.  
  14. A different 3-number prefix is used when dialing a military base using AUTOVON
  15. than the prefix used when dialing through the civilian phone system.  Usually,
  16. AUTOVON is accessed by dialing 8 or 88 and waiting for a dial tone(on any phone
  17. connected to the AUTOVON system).  A phone call made in this manner is limited
  18. to "ROUTINE" Priority.
  19.  
  20. There are "ROUTINE","IMMEDIATE", "FLASH", and "FLASH OVERRIDE" priorities, with
  21. ROUTINE being the lowest and FLASH OVERRIDE the highest To dial higher priority
  22. phone calls than routine, access to Technical control equipment is normally
  23. needed.
  24.  
  25. Calling AUTOVON exchanges might (most likely will) need a small phone
  26. modification.  This modification is known as a "SILVER BOX".
  27.  
  28.      -------------------------------------
  29.  
  30. Warning:  This modification could permanently damage you phone!!  Read
  31. information carefully!!!
  32.  
  33. Unscrew the two large screws on the base of your phone.  Take cover off and
  34. place it and the screws in a safe place.  Loosen (but don't remove) the screws
  35. on the sides of the touch tone keypad (These are on the sides, and attach it to
  36. its mounting brackets).  Now, CAREFULLY remove the pad from its brackets (be
  37. sure not to trip any wires!!) You will notice a plastic cover on the pad.
  38. Separate the two halves and put them out of your way...  Be sure not to destroy
  39. them!!!!  Now, turn over the pad.  You should see a mass of wires, gold plated
  40. contacts( yea, it's real gold!), discrete components, and two fairly large
  41. black, hmmm, things!  These are the coils that generate the frequencies.  Only
  42. one is used for standard, so all the coils are capable of generating all 4
  43. primary tones (only connections to 3 of the 4 are given, though...).  Your
  44. about to make your connection to the fourth, and make the third column of keys
  45. "bank switched" between normal and fourth row.  Now, cut three lengths of wire
  46. of different colors about 2 feet long.Look at the coil on the left (with the
  47. 5 solder contacts facing you) and solder a wire to the to the 4th post from the
  48. left.  This is the 1633 Hz output.  Solder the other end of this wire to the
  49. left pole of the smallest SPDT switch you can find.  This is the point of no
  50. return now!!!!..Take a look at the bottom edge of the keypad.  You should see a
  51. row of 3 gold plated contacts.Look at the one on the left.  This controls the
  52. rightmost bank of keys.  GENTLY separate the two touching connectors (they are
  53. soldered together with a drop of solder with) and spread them apart.  Solder a
  54. colored wire to the top contact, and solder it to the RIGHT pole of the SPDT.
  55. Now, take another colored wire (different color) and solder it to the bottom
  56. (closest) contact.  Solder the other end of this to the CENTER pole of the
  57. SPDT.
  58.  
  59. You have now completed the mods on your phone!!!  Congrats!!!  When the switch
  60. is in one position you'll get normal tones, in the other you'll get 1633 tones.
  61.  
  62.      -------------------------------------
  63.  
  64. Now, you're at the part that you have been waiting for!!  Testing!!  Call
  65. Directory Assistance using normal tones xxx-555-1212.  Now, quickly switch to
  66. 1633, and press down the [#] key.  You will now get a dial tone.  You can then
  67. switch back to normal, and try dialing different numbers.  The two most
  68. interesting are 6 and 7.  These often form a loop-around type connection, and
  69. two people can call in, one using 6 and one using 7, and talk in this matter...
  70. Happy Phreaking you bad boys!!
  71.  
  72.   ShAdOwRuNnEr
  73.  
  74.  Wait for Phile #4, posting some of the AUTOVON exchanges no.'s
  75.       Watch phor it!!!!!!
  76.  
  77.  
  78.          ____    __  __  __      ______
  79.         / __ \  / / / / / /     / ____/
  80.        / / / / / / / / / /     / /
  81.       / /_/ / / / / / / /     / /__
  82.      / ____/ / / / / / /     / ___/
  83.     / /     / /_/ /_/ /     / /____
  84.    /_/hree  \___/\___/orld /______/lite
  85.  
  86.  (916) 689-6241
  87. 24 Hours/7 Days
  88.       SysOp: Dark Creaper
  89.      Co-Sysop: ShAdOwRuNnEr
  90.  
  91.  
  92.  
  93.  
  94. DOWNLOADED FROM P-80 SYSTEMS.....
  95.  
  96.  
  97.